Lewitt LCT 450 Large Diaphram FET Sound Condenser Mic 

In every recording situation finding the right microphone for the job is key, so why waste time making corrections during mix-down when you can get the right sound directly from the source.

Introducing the LCT 450 by Lewitt. A modern and detailed mic with a world class transient response thanks to its thin gold layered low mass 1" diaphragm.

With cardioid polar pattern, you'll never have to worry about the unwanted spill from behind the microphone in live or studio environments and with two low-cut filters and attenuation clipping the LCT 450 is a modern classic built to perform.

SPECIFICATIONS:

• Acoustical operating principle: Pressure gradient transducer, externally polarised
• Diaphragm: 3 micron gold sputtered Mylar
• Transducer : 25.4 mm / 1 inch
• Polar pattern: Cardioid
• Frequency range: 20 to 20,000 Hz
• Sensitivity: 18 mV / Pa (-35 dBV)
• Enclosure: Zinc die cast
• Connector: Gold plated 3-pin XLR
• Dimensions: 138 x 52 x 36 mm
• Net weight: 357 g
• Signal / noise ratio: 85 dB (A)
• Equivalent noise level: 9 dB (A), according to IEC 60268-1
• Dynamic range of FET mic. Amp.: 129 dB (A)
• Max. SPL for 0,5 % THD: 138 dB, 0 dB pre-attenuation, 158 dB, 20 dB pre-attenuation
• Pre-attenuation pad: 20 dB / switchable
• Low cut: 12 dB / octave at 80 Hz
• Rated impedance: < 150 ohms
• Rated load impedance: > 1.000 ohms
• Supply voltage: 48 V +/- 4 V
• Current consumption: 5.5 mA