Supported Sample Rates
44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz (-4 / -0.1 / 0.1 / 4.167) at 24 bit
Focusrite RedNet HD32R
Product Code: MONF0010AU
0 Currently In Stock
OUT OF STOCK
$3,999
$3,999
0% OFF
Focusrite RedNet HD32R
32x32 Pro Tools | HD I/O With Dual PSUs
RedNet HD32R is a 1U, Pro Tools | HD interface for any Dante audio-over-IP network, providing up to 32x32 channels of I/O (16x16 at 192kHz) Featuring network and power supply redundancy, RedNet HD32R is the ideal choice for integrating your Pro Tools HD system into a Dante networked I/O environment in many critical-path applications, whether in Post Production, Broadcast, Live Sound or the Recording Studio.
A pair of DigiLink mini connectors allows RedNet HD32R to connect directly to any Pro Tools | HD system whether it's Native, HDX or even a legacy TDM system. Multiple RedNet HD32R units can be on the same Pro Tools system up to the maximum I/O channel count of Pro Tools, and Loop Sync I/O allows seamless integration with other Pro Tools interfaces such as HD I/O and Sync HD I/O.
32x32 Pro Tools | HD I/O for Dante audio-over-IP networks at up to 96kHz (16x16 at 192kHz)
Primary and Expansion DigiLink mini connections
Up to 24-bit, 192kHz sampling rates
AES67 compliant
Dual power supplies and network connections with full power and network redundancy including locking connectors for maximum reliability
Word Clock and Loop Sync I/O for increased flexibility and integration with other Pro Tools | HD hardware
Comprehensive remote control and remote signal metering through RedNet Control
Brainworx bx_console Focusrite – exclusive plug-in that faithfully captures the sound, feel and styling of the original Focusrite ISA 110 Equaliser and ISA 130 Dynamics Modules.
SPECIFICATIONS
DIGITAL PERFORMANCE
Clock Sources
Internal, Word Clock, Loop Sync (master or slave) or from Dante Network Master
External Word Clock Range
Nominal sample rate ±7.5
Channel Count
32x32 at up to 96kHz sampling rate, 16x16 at 176.4 and 192kHz
REAR PANEL CONNECTIVITY
Primary Port
1 x Mini DigiLink
Expansion Port
1 x Mini DigiLink
Word Clock Input
1 x BNC 75O port (switchable termination)
Word Clock Output
1 x BNC 75O port
PSU
2 x IEC Inputs with retaining clips
Network
2 x etherCON NE8FBH-S, also compatible with standard RJ45 connectors
FRONT PANEL INDICATORS
Primary PSU (A)
Green LED. Illuminates when an AC input is applied and all DC outputs are present
Primary PSU (B)
Green LED. Illuminates when an AC input is applied and all DC outputs are present
Primary Network
Green LED. Indicates that a network connection is present on primary port when in redundant mode
Secondary Network
Green LED. Indicates that a network connection is present on secondary port when in redundant mode
Network Locked
Green LED. When unit is network slave, shows valid network lock. When unit is network master
Sample Rate
Orange LED for each: 44.1 kHz, 48 kHz, x2, x4
Pull Up/Down
Orange LED. Indicates unit is set to operate on a Dante pull up/down domain
Signal Indicators
16 Green LEDs, 8 input/8 output indicators. Illuminate @ -126dBFS
Clock Source
Orange LED for each: Internal, Word Clock, Loop Sync and DAW Master
NETWORK MODES
Redundant
Allows unit to connect two independent networks
Switched
Connects both ports to integrated network switch allowing daisy-chaining of device
DIMENSIONS
Height
44.5mm/ 1.75"
Width
482.6mm/ 19"
Depth
263mm/ 10.35"
WEIGHT
Weight
3.9kg
POWER
Power PSU
2 x Internal, 100-240V, 50/60Hz, consumption 30VA
HEAT PERFORMANCE
Operating Temperature
Operates at up to an ambient temperature of 50 degrees Celcius
