LINE INPUT
0 DBFS Reference Input Levels: elements 18 or 24dBu (switchable)
Focusrite RedNet A8R
Product Code: MONF0014EU
0 Currently In Stock
OUT OF STOCK
$4,809
$4,809
0% OFF
Focusrite RedNet A8R
8x8 Analogue I/O With Dual PSUs
RedNet A8R is a 1U, 8x8 analogue line-level I/O interface for any Dante audio-over-IP network. Featuring network and power supply redundancy, RedNet A8R is the ideal choice for providing analogue I/O in many critical-path applications, whether in Post Production, Broadcast, Live Sound or the Recording Studio.
High-quality conversion with up to 119dB of dynamic range is provided through two rear-panel DB25 connectors while an additional pair of AES3 I/O is provided through male and female XLR for added flexibility. Word Clock I/O on BNC connectors allows external devices to clock to RedNet A8R, or alternatively allows RedNet A8R to act as a network clock grand master slaved to external input. Power is supplied through a pair of locking IEC power inlets, and network connections are provided with a pair of locking Neutrik etherCON connectors; providing redundant operation or daisy-chained operation.
Eight channels of high-quality line-level analogue I/O for Dante audio-over-IP networks
24-bit precision conversion up to 192kHz
119dB dynamic range, flat from 20Hz – 20kHz, +/-0.15dB
Software-selectable +24dBu or +18dBu level alignment
AES67 compliant
Dual power supplies and network connections with full power and network redundancy including locking connectors for maximum reliability
Word Clock I/O and DARS input for increased flexibility plus an additional two channels of AES3 I/O
Analogue I/O to AES59 standard on DB25 connectors
Comprehensive front-panel metering and indicators
Remote monitoring software with powerful graphic user interface
Brainworx bx_console Focusrite – exclusive plug-in that faithfully captures the sound, feel and styling of the original Focusrite ISA 110 Equaliser and ISA 130 Dynamics Modules.
SPECIFICATIONS
Frequency Response Inputs: 20Hz – 20kHz ± 0.1dB
THD N Inputs: <-130dB (0.00003)
EIN: -96dBu A-Weighted (typical)
Signal-To-Noise Ratio: 120dB A-Weighted (typical)
Converter Dynamic Range: 120dB A-Weighted (typical), 10Hz – 20kHz
LINE OUTPUTS
0 DBFS Reference Levels: 18 or 24dBu (switchable)
Frequency Response: 20Hz – 20kHz ± 0.1dB
THD N: <-100dB (0.001) unweighted, 20Hz – 20kHz; 23dBu input
Noise In Presence Of Signal: -94dBu A-Weighted (typical)
Dynamic Range: 118 dB A-Weighted (typical)
CROSSTALK
Input To Output Or Input: <-100dB unweighted, 20Hz – 20kHz; 23dBu input
Output To Input Or Output: <-100dB unweighted, 20Hz – 20kHz; -1dBFS input
DIGITAL INPUT SAMPLE RATE CONVERTERS
Sample Rate Range: 32kHz to 216kHz
Gain Error: -0.3dB
Dynamic Range Inputs: >138dB
Latency: 11 to 45 samples (network and sample rate dependent)
DIGITAL PERFORMANCE
Supported Sample Rates: 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz (-4 / -0.1 / 0.1 / 4.167) at 24 bit
Clock Sources: Internal or from Dante Network Master
External Word Clock Range: Nominal sample rate ±7.5
REAR PANEL CONNECTIVITY
Line Inputs: 1 x DB-25 connectors Analogue Outputs
Line Outputs: 1 x DB-25 connectors
Channel Count: 2 x 2 AES/EBU channels
Input (Optional DARS): 1 x Female XLR
Output: 1 x Male XLR
Word Clock Input: 1 x BNC 75O port (switchable termination)
Word Clock Output: 1 x BNC 75O port
PSU: 2 x Internal, 100-240V, 50/60Hz, consumption 24W
Network: 2 x etherCON NE8FBH, also compatible with standard RJ45 connectors
FRONT PANEL INDICATORS
Primary PSU (A): Green LED
Secondary PSU (B): Green LED
Primary Network: Green LED
Secondary Network: Green LED
Network Locked: Green LED
Sample Rate: Orange LED for each: 44.1 kHz, 48 kHz, x2, x4
Pull Up/Down: Orange LED
Channel Signal Level: Green LED (> -42dB), Orange LED (> -6dB) and Red (> 0dB)
AES/EBU Signal Indicators: 2 I/O signal indicator LEDs
Clock Source: Orange LED for each: Internal, Word Clock and DARS
NETWORK MODES
Redundant
Allows unit to connect to two independent networks
Switched
Connects both ports to integrated network switch allowing daisy-chaining of devices
