DPA d:dicate 4017B-R Shotgun Mic with Rycote Windshield

0 Currently In Stock

OUT OF STOCK

$2,985

0% OFF

DPA d:dicate™ 4017B-R Shotgun Mic with Rycote Windshield.

Directional characteristics:	Supercardioid, lobe-shaped
Principle of operation:	Pressure gradient, with interference tube
Cartridge type:	Pre-polarized condenser
Frequency range:	20 Hz to 20 kHz
Frequency range, ± 2 dB:	70 Hz to 20 kHz, permanent third order high pass filter at 50 Hz
Sensitivity, nominal ± 2 dB at 1 kHz:	19 mV/Pa; -34.4 dB re. 1 V/Pa
Equivalent noise level, A-weighted:	Typ. 14 dB(A) re. 20 µPa (max. 15 dB(A))
Equivalent noise level, ITU-R BS.468-4:	Typ. 25 dB (max. 26 dB)
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL):	Typ. 80 dB(A)
Total Harmonic Distortion (THD):	< 1 % up to 133 dB SPL peak
Dynamic range:	Typ. 119 dB
Max. SPL, peak before clipping:	138 dB
Filters:	High boost: +4 dB at 8 kHz. Low cut: First order filter, below 120 Hz
Output impedance:	< 150 ohm
Cable drive capability:	100 m (328 ft)
Output balance principle:	Signal balanced
Common Mode Rejection Ratio (CMRR):	> 40 dB
Power supply:	48 V Phantom power (± 4 V)
Current consumption:	4.5 mA
Connector:	XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: signal – phase
Color:	Matte black
Weight:	68 g (2.4 oz)
Microphone diameter:	19 mm (0.75 in)
Capsule diameter:	19 mm (0.75 in)
Microphone length:	212 mm (8.3 in)
Output voltage, RMS:	> 1.8 V
Polarity:	+V at Pin 2 for positive sound pressure
Temperature range:	-40 °C to 45 °C (14 °F to 113 °F)
Relative Humidity (RH):	Up to 90 %